Categories

Question: Mira sprint 8.5?

Is a 8.5 kW shower powerful enough?

7.5kW and 8.5kW shower rates require less power so the gentler flow of water will mean your shower is unlikely to ever run cold. What’s more, they’re usually cheaper models to purchase and run. If you’re okay with a gentler flow of water as the temperature rises, you can stick with this model.

What is the best Mira electric shower?

The Mira Sport Max 10.8kw is the perfect middle ground between the Triton Seville and the Bristan Bliss. It’s not digital, but it offers a slightly more modern design when directly compared to the Seville. And, it’s got the biggest kW output of all the showers on this list; it’s powerful.

Can I replace a 7.5 kW shower with a 8.5 kW?

4 Answers from MyBuilder Bathroom Fitters



A 7.5kw shower can be supplied using a 4mm cable, but for 8.5kw, you will need at least 6mm cable. Changing the fuse/circuit breaker would allow the shower to work but the cable could overheat and presents a fire risk.

Can I use 6mm cable for a 8.5 kW shower?

6mm cable, depending on the run, is likely to be fine for an 8.5kW shower. Rcd protection is helpful, but bonding and cross bonding are far more important. And a 30a breaker, fuse wire wouldn’t pop for overload either as it’s unlikely to be overloading long enough.

Are Mira Showers any good?

All Mira digital showers are quick and easy to fit, as well as being suitable for any type of domestic plumbing system. Their range of wireless digital showers have precise temperature and flow control, making them accurate and informative.

What is the difference between 8.5 KW and 10.5 KW shower?

Going back to the description of the electric showers, if you want your water hotter, the flow has to be slower. Higher powered electric showers have been introduced to combat this issue, so a higher power 10.5kW shower will be able to run at higher pressure at higher temperatures than 8.5kW electric showers.

Is 6mm cable OK for 9.5 KW shower?

9.5kW is either 39A or 41A depending on the voltage it is rated at. 6mm cable is 47A when installed in the most favourable conditions. So 6mm could be used, depending on how it is installed. However it would be usual to use 10mm which would allow the fitting of a higher rated shower either now or in the future.

How do you remove a Mira Sport shower cover?

Isolate the electrical and water supplies before installing the shower. Remove the three screws that hold the cover on and remove the cover. Remove the service tunnel.

Do I need an electrician to replace an electric shower?

If you are replacing an existing electric shower with a new one, it is certainly possible to install it yourself. If the shower unit has a higher wattage than the old one, you may need the assistance of an electrician as cables may need to be changed to withstand higher currents.

Are Mira showers interchangeable?

All our Mira shower hoses have universal fit, which means it is guaranteed to fit your existing shower. Plus, our high flow design means that by simply replacing your hose you’ll have a greater showering performance.

Is Mira sport a power shower?

Power showers explained



Power showers can often be confused with electric showers. Although similar in design to an electric shower with its white exterior (the Mira Sport, for example), an electric shower only uses a cold water supply and heats your water by running it over the built-in element.

1 звезда2 звезды3 звезды4 звезды5 звезд (нет голосов)
Loading...

Leave a Reply

Your email address will not be published. Required fields are marked *