Categories

Question: Timex ironman watch instructions?

1. Press and hold START/SPLIT until T1 or T2 appears and flashes. While setting the watch, if you do not press any buttons on the watch for a period of 2 to 3 minutes, the watch will automatically save 2. Continue to hold until the time switches and the watch beeps. whatever changes you have made and exit the setting process.

How do I set the time on my Timex Ironman watch?

SETTING

  1. First, find the regular time mode by pressing the MODE button until the time (with the date at the top) shows.
  2. Press & hold the SET button until the word ENTER disappears and is replaced by the word TIME. Release that button.
  3. Press either the MODE or the START/SPLIT button.

How do I turn the alarm off on my Timex Ironman watch?

Press START/STOP to select whether alarm is referenced to time shown in Time mode (t1) or Time 2 (t2). 4) Press SET, at any step, when done setting. To turn on/off alarm and hourly chime, press START/STOP repeatedly. Watch will step through four combinations of alarm and chime settings.

How do I set the time on my Timex Indiglo watch?

How to Set Dial Indiglo Watches. Pinch the winding knob on the right side of the watch between your thumb and forefinger. Pull the knob out from the watch slowly until it clicks into the first position. Turn the knob to move the hour and minute hand to set the time.

How do you change the day and date on a Timex Indiglo watch?

Pull the crown knob out to the middle position to set the day. The crown knob has three positions: “In,” “Middle” and “Out.” Turn the crown knob clockwise to advance the days up, until the current day appears in the window on the right side of the watch face.

How do I set the day on my Timex watch?

Pull crown to “middle” position and turn CLOCKWISE until correct day appears. If day does not change, pull crown to “out” position and turn CLOCKWISE or COUNTER CLOCKWISE through necessary number of 24 hour periods until correct day appears.

How do you set the Timex Ironman Womens watch?

Press and hold down the “Set/Recall” button to open the time set menu. This button is located at the top left side of your Timex. Hold the button down for 3-5 seconds to enter the time set menu. After that time, the screen will read “Set” across the top.

How do I stop my Timex watch from beeping?

This button is located in the same place on all Timex Indiglo models. However, on some models it is labeled as the “Alarm On” button. Hold the button down until the colon in between the hour and minutes on the display screen stays solid. This means that the hourly chime is turned off.

How do I set the time on my Timex kids watch?

  1. TIME AND DATE. A. Press and hold SET. HOURS digits will flash. B. Press START/STOP or DATE to change hour digits.
  2. ALARM. A. Press MODE until ALARM appears. B. Press and hold SET to select HOURS. Digits will flash.
  3. TIMER. A. Press MODE until TIMER appears. B. Press and hold SET to select HOURS. Digits will flash.

How do you reset a Timex chronograph watch?

TO ADJUST THE CHRONOGRAPH HANDS:

  1. 1) PULL out CROWN to “C” position. 2) PRESS pusher “A” intermittently until the seconds.
  2. sweep hand resets to “0” or 12-hr. position.
  3. the 12 o’clock eye reset to “0” or 12-hr position.
  4. NOTE: Make sure that the chronograph is stopped and reset before adjusting.

How do you date a vintage Timex watch?

Timex did not use serial numbers on their vintage watches but there are ways to date a Timex watch. From 1963 onwards a string of numbers may be found at the bottom of the dial on mechanical watches, the last two digits refer directly to the last 2 digits of the date, no decoding is required.

How much is a Timex Indiglo WR 30m?

timex indiglo wr 30m Prices: $9.49 – $200.00 | MAVIN.

1 звезда2 звезды3 звезды4 звезды5 звезд (нет голосов)
Loading...

Leave a Reply

Your email address will not be published. Required fields are marked *